Balun TV Converter Cable PAL IEC 9.5 TV male to RJ45 ethernet male coax cable
Since 2016, France’s Building and Housing Code has required that the RJ45 connectors and twisted-pair cables installed in new residential buildings be capable of transmitting all television signals (DTTV, satellite, cable).
This update to France’s building codes will eliminate the need for coaxial cable within the dwelling. Traditionally, dwellings were wired for both (twisted-pair copper and coaxial). Now, a single infrastructure with universal jacks will be the new standard.
The antenna riser architecture, however, will remain unchanged. TV signals coming in via coaxial cable will be connected to a twisted-pair distribution cable inside the home network cabinet.
Our balun cables are used to passively transmit a television signal coming from a coaxial cable to a twisted-pair cable. Our balun cables are suitable for DTTV, satellite, and cable signals.
These high-performance cables were used as the reference for performance in the development of the new standards.
The table below gives the theoretical performance specifications of these components; the maximum distance the receiver can be located for proper operation according to the XP C 90-483 standard is indicated.
TV 9,52 mm Mâle / RJ45 Mâle Connecteurs nickel Adaptation d’impédance 100 Ohms en 75 Ohms pour une transmission optimale des signaux TV hertziens
Cordon Balun TV RJ45 vers IEC 9.52 mâle – Ce cordon transmet les signaux Terrestres UHF, il est équipé d’une RJ45 et d’un connecteur IEC 9.52 Male. Il permet de raccorder une prise de communication RJ45 et une TV équipée d’une fiche IEC 9.52 femelle – Connecteur de type Fiche IEC male – Bande passante : 5 à 862 MHz – Affaiblissement
Sert à relier votre TV à votre prise murale RJ45. Ce cordon est compatible avec les réseaux de communication. Longueur : 2 mètres 1 connecteur RJ45 mâle blindé à contact dorés 1 prise TV 9,52mm mâle
Les points forts :
- Type de câble : Adaptateur Balun
- Connecteur : RJ-45 – mâle
- Connecteur (deuxième extrémité) : IEC connector (9.52mm) – mâle
